The main advantage of BIOplastics Extreme Uniform plastics is the controllability of (q)PCR, by working under optimally controlled reaction conditions. Features, advantages and benefits of Extreme Uniform plastics.
| (q)PCR tubes & plates | Special blend of polypropylene | Anti-static tubes | Maximum sample recovery |
| | Tubes non sticking for biomolecules | Low copy detection |
| | Flexible non cracking tubes | No loss of sample |
| Uniform wall thickness | Uniform heating | Consistent reaction conditions |
| | No risk of cracking | No loss of sample |
| | Minimize evaporation | Consistent reaction conditions |
| Uniform closure part tube/strip/plate | Uniform closure & interchangeability | Consistent reaction conditions |
| Thin wall lower part tube | Maximal heat transfer | Optimal reaction conditions |
| Thick wall upper part tube | Minimal evaporation | Consistent reaction conditions |
| Sealing ring in cap | Minimal evaporation | Consistent reaction conditions |
| Clever design cap | Easy opening and closing | “Finger” and RSI friendly |
| | Minimal evaporation | Consistent reaction conditions |
| Wide area indented caps | No “finger touch” while closing | Highly reproducible results |
| Wide range of (q)PCR products | Always a product to fit any thermocycler | Always best fitting plastics |
| Frosted plates and tubes | Higher signal noise/ratio | Lower copy detection |
| White plates and tubes | Highest signal noise/ratio | Low copy detection |
| | Avoid signal contamination from block | Consistent reaction conditions |
| Breakable plates | Allow adjustment of required wells | Increased efficiency/lower cost |
| Low profile tubes | Minimal evaporation | Consistent reaction conditions |
| Asymmetric holes in strips | Make your own plate | Easy transport and positioning |
| Optimal tube-block contact angle | Better heat transfer | Optimal reaction conditions |
| Alpha numeric markings | Easy sample location | Traceability samples |
| Auto-orientation holes | Easy sample identification | Traceability samples |
| Frosted writing areas | Easy sample marking | Traceability samples |
| Laser embedded marking and coding | Easy orientation | Traceability samples |
| | Uniquely coded | Avoid mix-up samples & trays |
| | Pipetting marker lines | Easy orientation |
| Extra robust strips | No twisting or bending | Easy to handle |
| | In line and no breakage | Easy positioning and handling |
| Filtertips and Tips | Special blend of polypropylene | Anti-static tips | Maximal sample recovery |
| | Tips non sticking for biomolecules | Low copy detection |
| | Flexible non cracking | Good fit & no loss of sample |
| | Natural and extremely clear | Easy view of contents |
| | Easy soft-fit and release from pipet | Limit RSI injuries |
| Beveled orifice (45°C) | Improve sample rejection accuracy | Consistent pipetting conditions |
| Graduated | Quick volume check | Minimize incorrect settings |
| Extended length | Avoid pipet to tube contact | Minimize cross contamination |
| 18 micron filter | Superior protection | Minimize cross contamination |
| Gradient Filter | Increases protection barrier | Minimize cross contamination |
| Extended filter length | Increases protection barrier | Minimize cross contamination |
| Modular Composed Tip Racks | Multi Application useable racks | Environment friendly |
| Micro Centrifuge tubes | Special blend of polypropylene | Anti-static tubes | Maximum sample recovery |
| | Easy opening & closing | Limit RSI injuries |
| | Flexible non cracking | No loss of sample |
| Clever design cap (inner round) | No corners in “inner part” | Maximal sample recovery |
| Graduated | Quick volume check | Helpful to avoid incorrect volumes |
| Screw Cap Tubes & Caps | Special blend of polypropylene | Anti-static tubes | Maximum sample recovery |
| | Easy opening & closing | Reduce RSI injuries |
| | Flexible non cracking | No loss of sample |
| | Wide applications range & temperature | No need for cryo tubes |
| Clever design cap | Absence of rubber O-ring | No leakage nor breakage |
| | | Suitable for organic solutions |
| | | Work range -200 °C to 100 °C |
| | No corners in “inner part” | Maximum sample recovery |
| | Slightly triangled cap | No roll over of tubes |
| Colored tubes and caps | Color Match of tube and cap | Minimize cross contamination |
| Work and Cryo Racks | Special blend of polypropylene | One hand opening & closure | Increase flexibility |
| | Flexible non cracking | No loss of samples |
| | Wide applications range & temperature | No need for “special” cryo racks |
| Clever design | Modular composed racks | Multi application usage |
| | Stackable | Space saving |
| | | |